IBM Enterprise Server S80, User Manual

Page: 223 / 282

Table 2. Operator Panel Function Codes (continued)
Function Code Function Selected
24 xxxx xxxx Reserved
25 xxxx xxxx The service representative switch 1 is set; this function is the
first step necessary to set the service function range from 50 to
70. NOTE: This function is for service representatives only and
should not be invoked by the user.
26 xxxx xxxx The service representative switch 2 is set; this function is the
second step necessary to set the service function range from
50 to 70. NOTE: This function is for service representatives
only and should not be invoked by the user.
27 xxxx xxxx through 31 xxxx
xxxx Reserved
32 xxxx xxxx Reserved
33 xxxx xxxx Reserved
34 xxxx xxxx Reserved
35 xxxx xxxx through 49 xxxx
xxxx Reserved
50 xxxx xxxx System processing unit stop.
51 xxxx xxxx System processing unit status.
52 xxxx xxxx System processing unit start.
53 xxxx xxxx Path switch and reset.
54 xxxx xxxx Reserved
55 xxxx xxxx Display low-level diagnostic service processor log buffer.
56 xxxx xxxx Display low-level diagnostic service processor code area.
57 xxxx xxxx Reserved
58 xxxx xxxx Display low-level diagnostic IPL parameters area.
59 xxxx xxxx Set first character of base address for function 62 display.
60 xxxx xxxx Set second character of base address for function 62 display.
61 xxxx xxxx Set third character of base address for function 62 display.
62 xxxx xxxx Display service processor control storage.
63 xxxx xxxx System status SRC trace.
64 xxxx xxxx Service processor diagnostic status SRC trace.
65 xxxx xxxx Reserved
66 xxxx xxxx Reserved
67 xxxx xxxx Reserved
68 xxxx xxxx Reserved
69 xxxx xxxx Reserved
70 xxxx xxxx Reserved
Appendix D. Operator Panel Functions
205