IBM Enterprise Server S80, User Manual

Page: 60 / 282

Using the CD-ROM Drive
CAUTION:
A Class 3 laser is contained in the device. Do not attempt to operate the device
while it is disassembled. Do not attempt to open the covers of the device, as it is
not serviceable and is to be replaced as a unit.
The CD-ROM is located in bay A of the I/O Drawer. Your CD-ROM drive looks like the
one shown in the illustration, and the controls are located as indicated.
When the CD-ROM is set to On, the status light indicates one of several conditions.
The following are status light states and the respective conditions of the CD-ROM drive:
v
Off during standby with the tray loaded or unloaded.
v
Blinks from insertion of the tray to completion of initialization.
v
Blinks slowly when either the lens or disc is dusty (lens should be cleaned by running
the cleaning disc).
v
Blinks fast when in the audio mode.
v
Lights during data transfer operations.
v
Lights steady when:
– No disc is in the tray.
– The disc is upside down in the tray.
– Some condition exists that should be checked. If this occurs, contact your service
representative.
Loading the CD-ROM Drive
Press the unload button to open the tray. Place the disc, with the printed side away
from the tray, into the tray. Push gently on the load/unload button. The drive
automatically pulls the tray into the drive and prepares the disc for reading.
Unloading the CD-ROM Drive
Push and hold the unload button until the drawer comes out and then remove the disc.
Tray Opening
Emergency
Eject Access
Load/Unload
Button
Status Light Volume Control
Head Phone
Jack
42
S80 and S85 User’s Guide