IBM BladeCenter T Series, Installation Manual

Page: 35 / 80

Chapter 3. Management, KVM, and LAN module LEDs
and external ports
This chapter describes the LEDs and controls on the BladeCenter T
management modules, KVM modules, and LAN modules. This chapter also
identifies the external ports on the KVM and LAN modules.
Management module controls and indicators
These management-module controls and indicators provide status information
about the management module and remote management connection. For
additional information, see the Hardware Maintenance Manual and Troubleshooting
Guide on the IBM BladeCenter T Documentation CD.
Power
Active
Error
Management Module
IP reset button
Management-module LEDs: These LEDs provide status information about the
management module and remote management connection.
v
Power: When this green LED is lit, it indicates that the management module
has power.
v Active: When this green LED is lit, it indicates that the management module
is actively controlling the BladeCenter T unit. Only one management module
actively controls the BladeCenter T unit. If two management modules are
installed in the BladeCenter T unit, this LED is lit on only one.
© Copyright IBM Corp. 2004
21