IBM BladeCenter T Series, Installation Manual

Page: 27 / 80

3. Remove the bezel assembly from the front of the BladeCenter T unit by
forcefully pulling forward on the blue touch points at the top sides of the
bezel.
ESD
A
C
I
N
!
D
C
O
U
T
A
C I
N
!
D
C
O
U
T
A
C
1
3
0
0
W
A
C
I
N
!
D
C
O
U
T
A
C
1
3
0
0
W
ser
ver
Bezel touch point
4.
Pull the bezel outward from the top and then lift it up and away from the
BladeCenter T unit. Carefully set the bezel aside in a safe location.
5. If you are replacing a management module, remove the current module
from the bay (see “Removing a management module” on page 15). If you
are adding a management module, remove the filler module from the
selected management-module bay and store the filler module for future
use.
Chapter 2. Installing and removing a management module
13