IBM BladeCenter HS22V 7871, Problem Determination And Service Manual

Page: 209 / 258

v See Chapter 4, “Parts listing, Types 7871 and 1949,” on page 41 to determine which components are CRUs and
which components are FRUs.
v
If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
089-802-xxx Aborted due a system resource availability
error.
1. Make sure at least 1 GB of memory is installed
in the blade server (see “Installing a memory
module” on page 64).
2. Make sure that the DSA Diagnostic code is
up-to-date, upgrade if necessary; then, rerun the
test. The latest code can be found on the IBM
support Web site at http://www.ibm.com/
support/docview.wss?uid=psg1SERV-DSA.
3. Make sure that the system firmware level is
up-to-date, upgrade if necessary; then, rerun the
test. The installed firmware level can be found
in the DSA Diagnostic Event Log within the
Firmware/VPD section for this component. The
latest level firmware for this component can be
found on the IBM support Web site at
http://www.ibm.com/support/
docview.wss?uid=psg1MIGR-4JTS2T.
4. If the blade server has stopped responding, turn
off and restart the blade server; then, rerun the
test. See “Turning off the blade server” on page
13 and “Turning on the blade server” on page
13.
5. (Trained service technician only) If the
component failure remains, refer to Chapter 5,
“Removing and replacing blade server
components,” on page 49 to replace the failed
component.
Chapter 6. Diagnostics
193