IBM BladeCenter HS22V 1949, Problem Determination And Service Manual

Page: 175 / 258

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
See Chapter 4, “Parts listing, Types 7871 and 1949,” on page 41 to determine which components are customer
replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
Trained service technician.
Error code Description Action
3008001 System configuration invalid.
1.
Run the Setup utility (see “Using the Setup
utility” on page 20). Select
Load Default Settings
and save the settings.
2. Reseat the following components one at a time in
the order shown, restarting the server each time:
v Battery (see “Removing the battery” on page
71 and “Installing the battery” on page 72).
v
Expansion cards (see “Removing an I/O
expansion card” on page 74 and “Installing an
I/O expansion card” on page 78).
3. Replace the following components one at a time
in the order shown, restarting the server each
time:
v
Battery (see “Removing the battery” on page
71 and “Installing the battery” on page 72).
v
Expansion cards (see “Removing an I/O
expansion card” on page 74 and “Installing an
I/O expansion card” on page 78).
v
(Trained service technician only) Replace the
system board (see “Removing the
system-board assembly” on page 94 and
“Installing the system-board assembly” on
page 95)
3008002 Date, time, or both are incorrect.
1.
Run the Setup utility (see “Using the Setup
utility” on page 20). Select
Load Default Settings
and save the settings.
2. Reseat the following components one at a time in
the order shown, restarting the server each time:
v Battery (see “Removing the battery” on page
71 and “Installing the battery” on page 72).
v
Expansion cards (see “Removing an I/O
expansion card” on page 74 and “Installing an
I/O expansion card” on page 78).
3. Replace the following components one at a time
in the order shown, restarting the server each
time:
v
Battery (see “Removing the battery” on page
71 and “Installing the battery” on page 72).
v
Expansion cards (see “Removing an I/O
expansion card” on page 74 and “Installing an
I/O expansion card” on page 78).
v
(Trained service technician only) Replace the
system board (see “Removing the
system-board assembly” on page 94 and
“Installing the system-board assembly” on
page 95)
Chapter 6. Diagnostics
159