Home
/
IBM
/
Aptiva Series
/
Handbook

IBM Aptiva Series, Handbook, Page: 87 / 164

Share

Page: 87 / 164

IBM Aptiva Series Handbook Download Page 87

Adding and removing adapter cards

7-3

Adding and removing adapter cards

The system board includes one ISA, three PCI, and one
ISA/PCI shared adapter card connectors. You can install a
maximum of five adapter cards in the system unit.

Installing adapter cards

See “Identifying adapter card connectors” on page 8-4 for
information on which adapter card connector to use.

Follow these steps to install an adapter card:

1.

Remove the screw that secures the adapter card slot
cover. Then remove the slot cover.

2.

Align and insert the adapter card into the adapter card
connector.

Important:

Make sure that you have followed the proper
procedure in “Opening the system unit” on page 6-4.
This ensures that you discharge the static electricity
that you may have accumulated.

v65xahb.book : chap-7.fm Page 3 Friday, January 16, 1998 4:27 PM

«
...
85
86
87
88
89
...
»

Summary of Contents for Aptiva Series





































































































































































Reviews:

No comments