manualshive.com logo in svg

IBM Aptiva Series, Handbook, Page: 135 / 164

Share
Download
IBM Aptiva Series Handbook Download Page 135

Technical reference

This part contains technical information you might need if 
you upgrade your computer’s hardware. It contains the 
following appendices:

“Appendix A: Specification tables” on
page A-1

This appendix contains specific memory, address, 
interrupt, channel, and port specifications. It also 
includes a list of the system board connectors and their 
corresponding functions.

“Appendix B: Modem information” on
page B-1

This appendix contains descriptive information about 
modems, including AT command set information you 
can use if you decide to operate your modem from a 
DOS command line.

“Appendix C: Monitor terminology” on page C-1

This appendix contains definitions of some of the terms 
generally used to describe monitor characteristics.

v65xahb.book : part6.fm  Page 25  Friday, January 16, 1998  4:27 PM

Summary of Contents for Aptiva Series





































































































































































Reviews:

No comments