manualshive.com logo in svg

IBM Aptiva Series, Handbook, Page: 144 / 164

Share
Download
IBM Aptiva Series Handbook Download Page 144

B-2

     Appendix B:  Modem information

V.42 (error correction)

MNP5 (data compression)

TIA/EIA 602 AT command set

V.8 start-up sequence

Plug and Play ISA specifications

V.80 (Video Ready Mode)

MNP2-4 error correction

PC 97 logo

Operating your modem

You can perform common modem functions such as dialing, 
file transfer, and faxing using the modem communications 
software that came with your computer. For information 
about configuring communications software, see 
“Configuring your communications software” on page 3-10.

It is still possible for you to perform the basic modem 
functions using the AT commands from the Windows 95 
DOS box prompt. A list and description of all the AT 
commands appear in the section “AT commands” on 
page B-6.

We strongly recommend, however, that you perform all 
modem operations through the modem communications 
software since it is designed to eliminate the inconvenience 
of using the AT commands. Modem software allows you to 
operate the modem by simply selecting command items 
from onscreen menus.

Note:

The communications software that came with your 
Aptiva computer provides a friendly interface for all 
common modem functions and should be sufficient for 
all of your communication needs.

Note:

Most modem communications software programs also 
allow you to send specific AT commands to the modem.

v65xahb.book : app-b.fm  Page 2  Friday, January 16, 1998  4:27 PM

Summary of Contents for Aptiva Series





































































































































































Reviews:

No comments