manualshive.com logo in svg

IBM Aptiva Series, Handbook, Page: 69 / 164

Share
Download
IBM Aptiva Series Handbook Download Page 69

Setup parameters     

5-13

Num Lock after boot

This parameter displays whether the NumLock function on 
the keyboard turns on automatically each time you turn your 
computer on. You can set this to Enabled or Disabled. The 
default is Enabled.

Memory test

When set to Enabled, this parameter allows the system to 
perform a RAM test during the POST routine. When set to 
Disabled, the system detects only the memory size and 
bypasses the test routine. The default setting is Disabled.

When the Fast POST Mode parameter is set to Auto, the 
Memory Test parameter is disabled and becomes non-
configurable.

System boot drive

This parameter has four options.

Drive A Then C

In this option, the system BIOS checks drive A first. If there 
is a diskette in the drive, the system boots from drive A. If 
there is no diskette, the system boots from drive C. This is 
the default setting.

Drive C Then A

In this option, the system BIOS checks drive C first. If there 
is no hard disk drive, the system boots from drive A.

Drive A Only

This option directs BIOS to boot up the system from
drive A.

Drive C Only

This option directs BIOS to boot up the system from
drive C.

v65xahb.book : chap-5.fm  Page 13  Friday, January 16, 1998  4:27 PM

Summary of Contents for Aptiva Series





































































































































































Reviews:

No comments