IBM 8676 - Eserver xSeries 335, Hardware Maintenance Manual And Troubleshooting Manual

Page: 106 / 172

Note: See “System” on page 112 to determine which components should be replaced by a field service technician.
Error code/symptom FRU/action
062
(Three consecutive startup failures using
the default configuration.)
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
4. Microprocessor.
101, 102
(System and processor error)
v
System board
106
(System and processor error)
v
System board
111
(Channel check error)
1. Failing adapter
2. DIMM
3. System board
114
(Adapter read-only memory error)
1. Failing adapter.
2. Run diagnostics.
129
(Internal cache error)
1. Microprocessor
2. Optional microprocessor (if installed)
3. System board
151
(Real time clock error)
1. Run diagnostics.
2. Battery.
3. System board.
161
(Real time clock battery error)
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
162
(Device configuration error)
Note: Be sure to load the default settings
and any additional desired settings; then,
save the configuration .
1. Run the Configuration/Setup Utility program.
2. Battery.
3. Failing device.
4. System board.
163
(Real-time clock error)
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
164
(Memory configuration changed.)
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
165
(Service Processor failure)
v System board
175
(Hardware error)
v
System board
176
(Computer cover or cable cover was
removed without a key being used)
1. Run the Configuration/Setup Utility program.
2. System board.
177, 178
(Security hardware error)
1. Run the Configuration/Setup Utility program.
2. System board.
96
xSeries 335 Type 8676, Type 8830: Hardware Maintenance Manual and Troubleshooting Guide