IBM 84885BU, Maintenance And Troubleshooting Manual

Page: 73 / 200

Input/output connectors
The server has the following input/output (I/O) connectors:
v One mouse
v
One keyboard
v
One parallel
v
Two serial
v
One video
v
Four Universal Serial Bus (USB) V 2.0 (two on front and two on rear)
v
One Ethernet (RJ-45)
v
One Ultra320 SCSI (some models)
The following illustration shows the locations of these connectors.
Power cords
Mouse
Keyboard
Parallel
Serial 1
Video
USB 1
USB 2
Ethernet
Serial 2
External SCSI
knockout
The following sections describe these connectors.
If you have an optional Remote Supervisor Adapter II (systems-management
adapter) installed in PCI slot 2, the server also has an additional Ethernet
connector, an additional serial connector, and an Advanced System Management
(ASM) Interconnect connector. See the documentation that comes with the Remote
Supervisor Adapter II for more information about the ASM Interconnect network. In
addition, if you install the optional Remote Supervisor Adapter II, you must
disconnect the video cable from the system board and connect it to the optional
Remote Supervisor Adapter II.
Chapter 4. Customer replacement units
63