![background image](http://html1.mh-extra.com/html/ibm/8270/8270_installation-and-service-manual_3406491063.webp)
Editing the BOOTPTAB File
Figure 4-4 shows an example of a BOOTPTAB file.
#Blank lines and lines beginning with '#' are ignored.
#Legend:
#
first field--hostname (may be full domain name)
#
bf--bootfile
#
bs--bootfile size
#
cs--cookie servers
#
ds--domain name servers
#
gw--gateway address list
#
ha--host hardware address
#
hd--bootfile home directory
#
hn--send hostname
#
ht--hardware type
#
im--impress servers
#
ip--host IP address
#
lg--log servers
#
lp--LPR servers
#
ns--IEN-116 name servers
#
rl--resource location protocol servers
#
sm--subnet mask
#
tc--template host (points to similar host entry)
#
to--time offset (seconds)
#
ts--time servers
#
vm--vendor magic cookie selector
#Be certain to include backslashes where they are needed.
#Define different master entries for each 8270 (or domain).
S82701:\
hn:\
ht=token-ring:\
vm=rfc1048:\
ha=0004AC281340:\
ip=134.177.169.111:\
sm=255.255.0.0:\
gw=134.177.169.201:\
bf=/etc/TRS_Bxxx.gz:
S82702:\
hn:\
ht=token-ring:\
vm=rfc1048:\
ha=1005A2B12A0:\
ip=134.177.169.48:\
sm=255.255.0.0:\
gw=134.177.169.201:\
bf=/etc/TRS_Bxxx.gz:
Figure
4-4. Example of a BOOTPTAB File
Configure the BOOTPTAB file to the 8270 to which the BootP server is attached.
Associate the MAC address and the IP address for Domain 0 as listed in the
Master Address Table.
Note: Do not use the MAC address in the Switch Information panel.
Chapter 4. Updating Software
4-7
Summary of Contents for 8270
