Rear view
The following illustration shows the connectors and LEDs on the rear of the server.
v
PCI slot 1:
Insert a low-profile PCI Express or PCI-X adapter into this slot.
Standard models of the server come with two PCI Express riser assemblies. You
can purchase an optional PCI-X riser-card assembly with bracket if you want to
install a PCI-X adapter in this slot.
v
PCI slot 2:
Insert a half-length, full-height PCI Express or PCI-X adapter into this
slot. Standard models of the server come with two PCI Express riser assemblies.
You can purchase an optional PCI-X riser-card assembly with bracket if you want
to install a PCI-X adapter in this slot.
v
Power cord connector:
Connect the power cord to this connector.
v
Video connector:
Connect a monitor to this connector. The video connectors on
the front and rear of the server can be used simultaneously.
v
Serial connector:
Connect a 9-pin serial device to this connector. The serial port
is shared with the integrated management module (IMM). The IMM can take
control of the shared serial port to redirect serial traffic, using Serial over LAN
(SOL).
v
USB connectors:
Connect a USB device, such as a USB mouse, keyboard, or
other device to any of these connectors.
v
Systems-management Ethernet connector:
Use this connector to manage the
server, using a dedicated management network. If you use this connector, the
IMM cannot be accessed directly from production network. A dedicated
management network provides additional security by physically separating the
management network traffic from the production network. You can use the Setup
utility to configure the server to use a dedicated systems management network or
a shared network.
v
Ethernet connectors:
Use either of these connectors to connect the server to a
network. When you use the Ethernet 1 connector, the network can be shared
with the IMM through a single network cable.
The following illustration shows the LEDs on the rear of the server.
Chapter 1. The System x3550 M2 server
27
Summary of Contents for 79463AU
