IBM 7212 102, Service Manual

Page: 75 / 92

Chapter 8. Servicing the DVD-RAM Drive
This chapter describes procedures to follow when a problem is detected with an
installed DVD-RAM drive feature. For additional information about the status
lights, operating features, and rear connections on the DVD-RAM drive feature,
refer to Chapter 9 in the 7212 Model 102 Storage Device Enclosure Setup and Operator
Guide
Before using or servicing any FRU, let it acclimate to the operating environment
for as long as it has been away from the environment or for 24 hours, whichever is
less.
Handling Static-Sensitive Devices
Attention: Storage devices drives are sensitive to static electricity discharge. To
prevent damage, when handling a storage device drive wrap it in an antistatic bag.
Take the following precautions:
v
Do not remove the drive from its antistatic bag until you are ready to install it.
v
With the drive still in its antistatic bag, touch it to the metal frame of an
electrically grounded surface.
v
Hold the drive by the frame. Avoid touching the solder joints or pins.
v
Handle the drive carefully to prevent permanent damage.
© Copyright IBM Corp. 2001, 2004
61