Note: You do not need to turn off the power to the server to install hot-swap power
supplies if your system has a redundant (third) power supply installed.
1. If your system does not have a redundant (third) power supply installed, shut down
the system as described in “Stopping the System Unit” on page 34 and turn off the
power to the server and peripheral devices. Otherwise, go to the next step.
2. To remove the power supply (1):
a. Unplug the power cord connector from the power supply.
Attention:
Be careful when you remove the hot-swap power supply; the power
supply might be too hot to handle comfortably.
b. Remove the defective power supply by placing the handle (5) on the power
supply in the open position (perpendicular to the power supply) and pulling the
power supply from the bay.
3. If you are not replacing the power supply:
a. Install a power-supply filler panel (2).
Note: During normal operation, each power-supply bay must have either a
power supply or filler panel installed for proper cooling.
b. Open the cable-restraint bracket (3) and remove the power cord from the
cable-restraint bracket. Close the cable-restraint bracket.
c. Unplug the power cord from the electrical outlet.
If you are replacing the power supply:
a. Place the handle (5) on the power supply in the open position, and slide the
power supply into the chassis.
b. Gently close the handle on the power supply to seat the power supply in the
bay.
c. Plug the power cord for the power supply into the power cord connector (4).
d. Verify that the AC Power light (6) and DC Power light (7) are lit, indicating that
the power supply is operating correctly.
e. If you have other options to install, refer to “Option List” on page 36.
72
Installation Guide
Summary of Contents for 6C1
