IBM 6C1, Installation Manual

Page: 82 / 144

Installing a CD-ROM, Tape Drive, DVD-RAM, or DVD-ROM
Read “Safety Considerations” on page 33.
1. If you have not already done so, shut down the system as described in “Stopping
the System Unit” on page 34.
2. If you have not already done so, unplug the system unit power cables from the
electrical outlets.
3. If your server is a Model 6C1 (rack mount), place the server in the service position
as described in “Placing the Model 6C1 in the Service Position” on page 35.
4. Remove the bezel as described in “Removing the Bezel” on page 39.
5. Remove the filler panel from the bay opening by pulling the filler panel away from
the server. You do not need the filler panel when you have a drive installed in the
bay.
6. Touch the static-protective bag containing the drive to any unpainted metal surface
on the server; then, remove the drive from the bag and place it on an antistatic
surface.
7. Set any jumpers or switches on the drive according to the documentation that was
provided with the drive.
8. Install rails on the drive.
a. Pull the blue slide rails off the back of the filler panel.
66
Installation Guide