IBM 689912U - IntelliStation Z - Pro 6899, Hardware Maintenance Manual

Page: 85 / 472

Diagnostic Error Code FRU/Action
170-198-XXX
Voltage Sensor(s) test
aborted 1. If a component is
called out, make sure
it is enabled and/or
connected
2. Flash the system and
re-test
3. Go to “Undetermined
Problem” on page 81
170-199-XXX
Voltage Sensor(s) test
failed, cause unknown 1. Go to “Undetermined
Problem” on
page 81.
2. Flash the system and
re-test
3. Replace component
under function test.
170-250-XXX
170-251-XXX
Voltage Sensor(s) Voltage
limit error 1. Power supply
2. System board
170-254-XXX
Voltage Sensor(s) Voltage
Regulator Module error 1. Voltage Regulator
Module (VRM)
2. Microprocessor
3. System board
175-000-XXX
Thermal Sensor(s) Test
Passed 1. No action
175-0XX-XXX
Thermal Sensor(s) failure 1. Flash system
2. System board
175-195-XXX
Thermal Sensor(s) Test
aborted by user 1. Information
2. Re-start the test, if
need to
175-196-XXX
Thermal Sensor(s) test halt,
error threshold exceeded 1. Depress F3 to review
the log file. See
“Viewing the Test
Log” on page 209.
2. Re-start the test to
reset the log file.
175-197-XXX
Thermal Sensor(s) test
warning 1. Make sure
component that is
called out is enabled
and/or connected
2. Re-run test
3. Component that is
called out in warning
statement
4. Component under test
175-198-XXX
Thermal Sensor(s) test
aborted 1. If a component is
called out, make sure
it is enabled and/or
connected
2. Flash the system and
re-test
3. Go to “Undetermined
Problem” on page 81
Service Information
75