IBM 689912U - IntelliStation Z - Pro 6899, Hardware Maintenance Manual

Page: 249 / 472

IBM Wireless LAN
This section provides information on the IBM Wireless
LAN. For additional help, detailed messages, and
recommended actions, refer to the
Installing and Operating
Your Network manual, supplied with the IBM Wireless LAN
product.
ISA Bus Switch Settings
To install the adapter in a computer with an ISA bus, set
the dip switches as shown below:
ISA Type Connector
1
0
1 2 3 4 5 6 7 8
Figure 1. Preparing the Adapter Card for an ISA Based
Computer
The switch positions shown in Figure 1 represent the
value 00000001, that is, switch 8 has been set to value 1
(one), the others are set to value 0 (zero).
Important
Ÿ
For setting the switch positions 0 or 1, use
the values shown on the adapter card. DO
NOT use the values printed or inscribed on
the switch itself.
Ÿ
The settings shown in Figure 1 apply to most
computer configurations.
ISA Mode Operations Parameters
The following provides the possible values for ISA mode
operation parameters that you can select according to your
system configuration:
Ÿ
Input/Output (I/O) Base Address (this is used by the
computer to identify and communicate with each
individual adapter).
Reference Information
239