IBM 689912U - IntelliStation Z - Pro 6899, Hardware Maintenance Manual

Page: 47 / 472

POST Error Code FRU/Action
184
Password removed due to
check-sum error.
(See next 184 for Type
6862, 6889, 6892) 1. Enter new password
184
Type 6862, 6889, 6892
No RFID Antenna 1. Make sure Asset
Care and Asset ID
are enabled in
Configuration/Setup.
2. RFID Antenna
3. System Board
185
Corrupted boot sequence. 1. Set configuration and
reinstall the boot
sequence.
186
Type 6562, 6592, 6862,
6889, 6892 1. Riser Card, if
installed
2. System Board
187 1. Clear Administration
password
2. System Board
189 1. More than three
password attempts
were made to access
the computer.
190
Chassis intrusion detector
was cleared.
This is information only, no
action required.
If this code does not clear: 1. System Board
2. Riser Card, if installed
1XX
Not listed above. 1. System Board
201, 20X
Memory data error. 1. Run Enhanced Diag.
Memory Test
2. Memory Module
3. System Board
225 1. Unsupported Memory
229
External cache test error. 1. L2 Cache Memory
2. System Board
262
POST detected a base
memory or extended
memory type error. 1. Run Setup. Check
System Summary
menu for memory
type change. (See
“Setup Utility
Program” on
page 220.)
2. Run the Extended
Memory Diagnostic
tests.
301 1. Keyboard
2. Keyboard Cable
3. System Board
Service Information
37