IBM 689912U - IntelliStation Z - Pro 6899, Hardware Maintenance Manual

Page: 83 / 472

Diagnostic Error Code FRU/Action
086-001-XXX
Mouse Port interface
Presence 1. Mouse
2. System board
086-032-XXX
Mouse Port interface Device
controller failure 1. Mouse
2. System board
086-035-XXX
Mouse Port interface Reset 1. Mouse
2. System board
086-040-XXX
Mouse Port interface IRQ
failure 1. Run Setup
2. Mouse
3. System board
086-195-XXX
Mouse Port interface Test
aborted by user 1. Information
2. Re-start the test, if
need to
086-196-XXX
Mouse Port interface test
halt, error threshold
exceeded 1. Depress F3 to review
the log file. See
“Viewing the Test
Log” on page 209.
2. Re-start the test to
reset the log file.
086-197-XXX
Mouse Port interface test
warning 1. Make sure
component that is
called out is enabled
and/or connected
2. Re-run test
3. Component that is
called out in warning
statement
4. Component under test
086-198-XXX
Mouse Port interface test
aborted 1. If a component is
called out, make sure
it is enabled and/or
connected
2. Flash the system and
re-test
3. Go to “Undetermined
Problem” on page 81
086-199-XXX
Mouse Port interface test
failed, cause unknown 1. Go to “Undetermined
Problem” on
page 81.
2. Flash the system and
re-test
3. Replace component
under function test.
089-000-XXX
Microprocessor Test Passed 1. No action
089-XXX-XXX
Microprocessor failure 1. Microprocessor(s)
2. System board
089-195-XXX
Microprocessor Test aborted
by user 1. Information
2. Re-start the test, if
need to
Service Information
73