IBM 6400 Series, User Manual

Page: 196 / 214

196
Chapter 5
CST Manager Version Control System
Creating a New File
When creating and saving a file for the first time, the Set Application Name
dialog box opens prompting you to enter a logical name to identify the
application.
Figure 167. Setting the CST Application Name
Opening an Existing File
When you select File -> Open, or upload a file from the printer, the VCS
checks if the file contains version information. If not, a dialog box opens and
prompts you to enter a logical application name. The version number is set to
1.00A. You can then start modifying the application.
Modifying an Existing File
After opening an existing file, the process of building and modifying the
application starts. To save your work as a new file or subsequent
modifications of an existing file, do the following:
• Save As New File
Select File -> Save As. The application name is already assigned and the
version number is 1.00A. Select a folder name, enter a file name, and
click Save. The file is then stored on disk.