IBM 5886, Removal And Replacement Procedures

Page: 24 / 38

– Keep all electronic components in the shipping container or envelope until you are ready to
install them.
– If you remove, then reinstall an electronic component, temporarily place the component on an
ESD pad or blanket, if available.
3. Remove the power supply.
Note: If you are removing the power supply with the power on, this operation must be performed
within 15 minutes to prevent overheating.
a. Turn off power switch on right side of the power supply (A) to be removed.
b. Label and remove the power cable from the power supply to be removed.
c. On the left side of the power supply, press the orange release tab (B) to the right as you rotate the
handle (C) downward.
d.
Using the handle, gently slide the power supply out of the enclosure, supporting the bottom while
you do this.
12