![background image](http://html.mh-extra.com/html/behavioral-safety/te540/te540_manual_2721377001.webp)
INNOVATION NEVER RESTS
BESAFEPRO.COM
706.705.1500
TE540 IOM
REV 07/2019 | 1
LIGATURE RESISTANT PROTECTIVE TV ENCLOSURE
#TE540
Installation Guide
1. Carefully unwrap the enclosure components. DO NOT
CUT OPEN. Use caution as to not scratch or cross-thread
aluminum frame and screws.
2. Install the eight (8) corner connectors on the front and
back panels with the 1/4’’-20 x 3/4’’ button head screws.
Be sure to hand tighten only.
3. Install the four (4) horizontal corner posts on the rear
frame with 1/4’’-20 x 3/4’’ button head screws. Be sure to
hand tighten only.
4. Snap the four (4) corner caps to the four corners of the
rear frame. Secure the corner caps using the small Pin
Head Torx Screws with the included bit. Be sure to hand
tighten only.
5. Center the the rear frame over the TV and mark all four (4)
corners of the frame on the wall with a pencil. Be sure to
also mark the wall under the top frame for height. Using a
minimum 24’’ level (48’’ preferred level). Extend the upper
frame pencil mark in each direction. If a TV was previously
installed, you may now remove it from the wall.
CAUTION:
Do not use power tools assembling the enclosure frame to avoid
cross threading the frame.
NOTE:
Once frame is installed it is recommended that wall be painted
flat black for aesthetic purposes.
corner
caps