Table 1. User settings (continued)
Submenu
Available settings
Default settings
On/Off settings
Cold start
[Enabled] [Disabled]
Authorize the unit to
start on battery
power.
[Enabled]
Forced reboot
[Enabled] [Disabled]
If mains recover
during a shutdown
sequence:
If set to Enable,
shutdown sequence
will complete and
wait 10 seconds prior
to restart, if set to
Disable, shutdown
sequence will not
complete and restart
will occur
immediately.
[Enabled]
Auto restart
[Enabled] [Disabled]
Authorize the unit to
restart automatically
when mains recover
after a complete
battery discharge.
[Enabled]
Energy saving
[Enabled] [Disabled]
If Enabled, UPS will
shut down after 5
min. of back-up time,
if no load is detected
on the output.
[Disabled]
Sleep mode
[Enabled] [Disabled]
If Disabled, LCD and
communication will
turn OFF
immediately after
UPS is OFF.
If Enabled, LCD and
communication stays
ON 1h30 min. after
UPS is OFF.
[Disabled]
Remote command
[Enabled] [Disabled]
If Enabled, shutdown
or restart commands
from software are
authorized.
[Enabled]
16
Installation and User's Guide
Summary of Contents for 5594-1AX
