IBM 4247-V03, Maintenance Information

Page: 71 / 311

Table 14. MAP 0190: Forms feed problems (continued)
Step Questions/Actions Yes No
18.
A paper presence sensor failure can cause a or
099
forms
jam message to display instead of an
001 End of Forms
message.
Did the printer fail to detect end of forms?
Run T&D15, including
performing a sensor tune, and
verify correct sensor
operation. If not OK:
v
Install a new logic board
(see Logic board).
v
If the printer is still failing
after the logic board has
been changed, install a new
sensor assembly cable (go
to Sensor cable assembly).
Run T&D in automatic mode
to verify correct printer
operation (see Running the
test and diagnostic (T&D)
programs).
Go to step 19.
Chapter 1. Diagnosing problems
71