IBM 4247-V03, Maintenance Information

Page: 69 / 311

Table 14. MAP 0190: Forms feed problems (continued)
Step Questions/Actions Yes No
13.
Perform the AFTA service check.
Go to “Main paper drive check and adjustment” on page 166.
Is the service check OK?
Replace the upper feed roller
if worn rollers are suspected.
(This procedure is complete.) Repair, as needed.
Run T&D in automatic mode
to verify correct printer
operation (see Running the
test and diagnostic (T&D)
programs).
14.
Perform the tractor assembly service check (see Tractor
asm. service checks).
Is the service check OK?
You have completed this
procedure. Repair as needed.
Run T&D in automatic mode
to verify correct printer
operation (see Running the
test and diagnostic (T&D)
programs).
15.
This is a 099 message. Check for customer operating errors.
Was the customer performing a PARK operation?
Tear off the forms in the area
between the printhead and the
tear bar.
Complete the Park operation.
Inform the customer that
forms must be torn off at the
tear bar before he confirms
the Park operation.
The
099
message occurred
because the printer could not
completely back the forms up
onto the tractor.
Go to step 16.
Chapter 1. Diagnosing problems
69