2.
If this device is the last device on the SCSI bus, terminate the SCSI bus by
adding the appropriate (LVD or SE) terminator to the last connector on the
SCSI cable.
1
Terminator
2
SCSI ribbon cable
Note:
The SCSI cable in your server may already have a terminator at the end
of the cable. Do not add another terminator to an already terminated
cable, or you may experience problems.
Step 4. Mounting the drive
Mount the tape drive; then attach the SCSI and power cables to it. If there is
insufficient working space to attach the connectors after mounting the drive,
attach the cables first. To mount the drive, follow these steps:
Installation and user’s guide
1-5
Summary of Contents for 40/80 GB HH DLTVS
Page 1: ...40 80 GB HH DLTVS Internal Tape Drive User s Guide OPTIONS by IBM...
Page 4: ...iv 40 80 GB HH DLTVS Internal Tape Drive User s Guide...
Page 28: ...2 6 40 80 GB HH DLTVS Internal Tape Drive User s Guide...
Page 30: ...A 2 40 80 GB HH DLTVS Internal Tape Drive User s Guide...
