IBM 1585 (MT 4539), User Manual

Page: 71 / 124

Printing A5/Statement or JIS-B5/Executive sizes
69
Printing
Printing A5/Statement or JIS-B5/Executive sizes
When Auto Size Sensing is set to On, the printer cannot distinguish between Statement and A5 or Executive and JIS-B5.
Follow these directions to change the Size Sensing setting.
Note: This is not necessary when printing from the multipurpose feeder.
1
Make sure the printer is off.
2
Press and hold the and buttons while you turn the printer on.
3
Release both buttons when
Performing Self Test
appears on the display.
The printer performs its power-on sequence, and then
Config Menu
appears on the first line of the display.
4
Press until
Size Sensing
appears, and then press .
Tray 1 Sensing
appears on the second line of the display.
5
Press and release or to select the input option that has A5/Statement or JIS-B5/Executive loaded, and
then press .
The first line of the display shows the selected input option, and the second line shows the current setting.
6
Press or to change the setting to
Sense A5
/
Sense Statement
or
Sense JIS-B5
/
Sense Executive
, and
then press .
Submitting Selection
appears briefly on the display, and then is replaced by
Config Menu
on the first line and
Size Sensing
on the second line.
7
Press and release or until
Exit Config Menu
appears, and then press .
Activating Menu Changes
appears briefly, followed by
Performing Self Test
. The printer returns to
Ready
.