IBM 1585 (MT 4539), User Manual

Page: 62 / 124

Identifying and linking output bins
60
Printing
Identifying and linking output bins
There is one standard output bin on all printer models. If you need additional output capacity, the optional finisher provides
up to 3500 sheets of additional output capacity.
The following table provides information on output bin capacities.
Linking output bins
If you have multiple output bins, linking them lets you create a single output source so the printer can automatically switch
output to the next available bin. For more information on the values available to configure your output bins, see the Menus
and Messages Guide.
Note: The bin sequence for linking always starts with the standard bin and proceeds from the bin nearest
to the floor to the bin farthest from the floor.
To link output bins:
1
Press on the operator panel.
2
Press until
Paper Menu
appears, and then press .
Output bin Each bin accommodates Illustration of output bin
Standard bin • 500 sheets
*
(75 g/m
2
[20 lb])
plain paper
• 300 transparencies
• 200 labels
• 50 envelopes
(75 g/m
2
[20 lb])
Finisher bin 1 500 sheets (75 g/m
2
[20 lb])
plain paper
Finisher bin 2 3000 sheets
†
(75 g/m
2
[20 lb])
plain paper
*
Standard bin capacity with finisher installed: up to 300 sheets.
†
This capacity may decrease if mixed print media sizes are sent to this bin.
Standard bin
Bin 1
Bin 2