IBM 1220 User Reference Download Page 98

Page: 98 / 216

Remove Paper
<specified bin>

What this message means:

The specified output bin, or bins, is full.

What you can do:

Remove the stack of paper from the specified bin(s) to clear the message.

Resetting
Active Bin

What this message means:

The printer is resetting to the active bin in a linked set of bins.

What you can do:

Wait for the message to clear.

Resetting
Fuser Cnt Value

What this message means:

The printer is resetting the counter that tracks wear on the fuser.

What you can do:

Wait for the message to clear.

Resetting the
Printer

What this message means:

The printer is resetting to the current default settings. Any active print jobs are cancelled.

What you can do:

Wait for the message to clear.

See also:

Changing menu settings

Summary of Contents for 1220

























































































































































































































Search results

Summary of Contents for 1220

Reviews:

Related manuals for 1220

Brands by name

Popular brands

IBM 1220, User Reference

Search results

Summary of Contents for 1220

Reviews:

Related manuals for 1220

Brands by name

Popular brands