IBM 1220 User Reference Download Page 51

Page: 51 / 216

Disabling size sensing

To disable auto size sensing:

Turn the printer off.

Press and hold the

Select

and

Return

buttons, and then turn the printer on.

Release the buttons when

Performing Self Test

appears on the display.

When the printer self test completes, Config Menu appears.

Press

Menu

until you see Size Sensing, and then press

Select

Note: Only paper trays that support auto size sensing are displayed on the operator

panel.

Press

Menu

until you see Tray x Sensing, where x represents the number of the tray for which

you want to disable size sensing, and then press

Select

Repeat for other trays, if necessary.

Press

Menu

until you see Off, and then press

Select

Saved

briefly appears. Config Menu appears again with Size Sensing on the second line.

Press

Return

Press

Menu

until you see Exit Config Menu, and then press

Select

Activating Menu Changes

briefly appears, followed by

Performing Self Test

. The

printer returns to the

Ready

message.

Summary of Contents for 1220

























































































































































































































Search results

Summary of Contents for 1220

Reviews:

Related manuals for 1220

Brands by name

Popular brands

IBM 1220, User Reference

Search results

Summary of Contents for 1220

Reviews:

Related manuals for 1220

Brands by name

Popular brands