Press the Up or Down select push button to select a 21 in the data window.
Press the enter button.
__ 20.
Did you get the display prompting you for a Dedicated Service Tools (DST)
user id and password?
Yes
No
↓
Recheck the cables and Operations Console setup. Then return to
step 19 on page 13.
__ 21.
Sign on the DST display.
In the
User
field, type
QSECOFR
.
In the
Password
field, type
QSECOFR
.
__ 22.
Select Work with DST environment.
__ 23.
Select System devices.
__ 24.
Select Console mode.
__ 25.
Select Operations Console.
__ 26.
Press PF3.
__ 27.
Select Start a service tool.
__ 28.
Select Operator Panel functions.
__ 29.
Press PF10 to confirm the power down.
Press the
Enter
key.
__ 30.
Wait for the power light to turn off.
__ 31.
Go to “Completing the Installation” on page 20.
Installing Windows NT Console Support
__ 1.
To determine if you have Remote Access Service (RAS) installed, click on:
__ a.
Start
__ b.
Settings
__ c.
Control Panel
__ d.
Modems
__ 2.
Did the Install New Modem window appear?
No
Yes
↓
Go to step 5.
__ 3.
Is AS/400 Operations Console Connection listed?
No
Yes
↓
Click on
Cancel or Close
. Then go to step 7 on page 15.
__ 4.
Click on
Add
.
__ 5.
Checkoff the box
Don’t detect my modem; I will select it from a list....
. Then
click on
Next
.
__ a.
Click on
Have disk
.
__ b.
Type the following:
C:\Programs Files\IBM\Client Access\Aoc\Inf
Press the
Enter
key.
__ c.
Click on
OK
. The entry
AS/400 Operations Console Connection
should be shown.
__ d.
Click on
Next
.
14
AS/400e 170 or 250 0367 Operations Console and 0381 Remote Control Panel Cable V4R5
