©Copyright Lotronic 2017
3
LASER EMISSION DATA
* As measured under IEC measurement conditions for classification.
Laser Power :
SCAN500RGB : 100mW-G-532nm+200mW-R-650nm+200mW-B-445nm
SCAN1100RGB: 200mW-G-532nm+300mW-R-638nm+600mW-B-445nm
SCAN2000 RGB: 500mW-G-532nm+500mW-R-638nm+1000mW-B-445nm
SCAN1100PINK: 500mW-R-638nm+600mW-B-445nm
Specification:
Mains Input: ....................................................................................... AC100~240V, 50/60Hz, total 30W
Fuse: .................................................................................................... 250V 2A slow blow (20mm glass)
Menu mode: .............................................. Auto, music, DMX512, Master/slave, ILDA, Artnet RJ45, IRC
Laser Classification: ..................................................................................................................... Class 3B
Laser Safety Standard: ................................................................................................... EN60825-1:2014
Condition Temperature: .......................................................................................................... 10
℃
~40
℃
DMX channels ................................................................................................................... 5 / 34 channels
Dimensions ................................................................................................................ 246 x 211 x 105mm
Weight: ............................................................................................................................................ 3.5kg
Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid
vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure
and able to support a weight of 10 times of the unit’s weight. Also always use a safety cable that can hold 12 times
the weight of the unit when installing the fixture.
DMX512
1. Install the units in a suitable position (laying or appending).
2. Use standard XLR microphone cable chain your units together via the XLR connector on the rear of the units. For
longer cable runs we suggest a terminator at the last fixture.
3. Assign a DMX address to each the unit.
Laser Classification
Class 3B
Green Laser Medium
DPSS 532nm
Red Laser Medium
LD GaAIAs 638nm,typical
Blue Laser Medium
LD InGaN 445nm, typical
Beam Diameter
<3mm at aperture
Divergence(each beam)
<1.3 mrad
Divergence(total light)
<1.3mrad
Transverse Beam Mode
TEM
00
Cooling
TEC & Fan Cooling
Scanning
High speed scanner 25kpps
