©Copyright Lotronic 2017
4
4. Turn on all units' power, the units begins reset, then the unit begins working.
5. Use DMX console to control your units.
Operating introduction
：
1. Built-in performance programs, AUTO, SOUND
2. DMX mode
3. Master/Slave
4. ILDA DB25 mode
5. Artnet RJ45 mode
Operation
：
Mode/Function: Set the operating mode of laser.
Confirmation: Confirms all settings or changes of LED control panel.
UP/DOWN: Changes the operating mode, parameter or DMX address.
Operation description:
Set the function overview:
* [FUNCTION] key:
At every short press on the FUNC button, following actions are active :
-
INDR - DMX (5-CH simplified DMX mode) + you can set the DMX address via the UP/DOWN buttons and
confirm with ENTER
-
DMX (34-CH advanced DMX mode) + you can set the DMX address via the UP/DOWN buttons and confirm
with ENTER
-
INDR SE (1 – 2 – 3) = 3 AUTO or sound-controlled mode. The ENTER button toggles between these 2 modes
(SND is displayed)
The SE 1 sequence (beam/tunnels, waves mode) – SE 2 (animation 1) – SE 3 is accessible via the sub-menu.
To access the sub menu keep the FUNC button pressed for at least 3 seconds. SET is displayed on the bottom right
