©Copyright Lotronic 2017
5
side of the display. You are now in the setting menu.
Select the sequence by selecting SE and press ENTER.
This sub-menu also allows to (not recommended for beginners!)
•
Configure motors X & Y via dr – X and dr – Y
•
Invert motors (SWAP XY)
•
Set the projection size (X-SIZ with values from 0 to 100 and Y-SIZE with values from 0 to 100)
•
Activate/deactivate the remote control ( REMOTE – ON/OFF)
To leave the menu, keep FUNC pressed.
*
Overview of playback modes
:
There are multiple playback modes:
- Built-in Master mode: divided into three small playback modes.
>1: mixed playback: Drawing scenes from each sequence in taking turn playback (can be set by setting the
function).
>2: Sequence playback: only play a sequence. (This mode for the temporary mode, restart laser will not
automatically enter)
>3: Scene playback: only play a scene. This mode for the temporary mode, restart laser will not automatically
enter)
- Slave mode: divided into the following two slave modes:
>1: DMX slave mode: Through the DMX signal line to follow the Master to play.
>2: ILDA slave mode: Accept the ILDA signal control from the Master or laser console.
-
DMX playback mode
:
>1:Easy DMX mode: 5 channels
Note:
Simple DMX mode takes the built-in scenes of the laser directly without any further settings.
CHANNEL
DMX
value
DESCRIPTION
CH 1
On/off power
0
OFF
1-255
ON
CH2 Act
auto/sound
0-127
AUTO
128-255 SOUND CONTROLLED
CH3
Gallery Menu
(scenes)
0-15
1 gallery (0)
16-31
2 gallery (16)
32-239
3 gallery (32)
240-255 40 gallery (240)
CH4
Scenes
0-255
Each value corresponds to a pattern, the value exceeds the number of patterns, the
system with the largest number instead
CH5
colors
0-31
RGB
32-63
red
64-95
yellow
96-127
green
128-159 blueviolet
160-191 blue
191-223 purple
224-255 white
