![background image](http://html1.mh-extra.com/html/ibase-technology/si-60e-m/si-60e-m_user-manual_3237210005.webp)
5
Safety Information
Your SI-60E is designed and tested to meet the latest standards of safety for
information technology equipment. However, to ensure your safety, it is important that
you read the following safety instructions
Setting up your system
•
Read and follow all instructions in the documentation before you operate your
system.
•
Do not use this product near water.
•
Set up the system on a stable surface. Do not secure the system on any unstable
plane.
•
Do not place this product on an unstable cart, stand, or table. The product may
fall, causing serious damage to the product.
•
Slots and openings on the chassis are for ventilation. Do not block or cover these
openings. Make sure you leave plenty of space around the system for ventilation.
Never insert objects of any kind into the ventilation openings
.
•
This system should be operated from the type of power indicated on the marking
label. If you are not sure of the type of power available, consult your dealer or
local power company.
•
Use this product in environments with ambient temperatures between
0˚C and
45˚C.
•
If you use an extension cord, make sure that the total ampere rating of the
devices plugged into the extension cord does not exceed its ampere rating.
•
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 80° C
(176° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
Summary of Contents for SI-60E-M
