manualshive.com logo in svg

IBA PADU-8-M, Manual, Page: 28 / 39

Share
Download
IBA PADU-8-M Manual Download Page 28

 

Manual ibaPADU-8-M

 

28 

Issue 1.9 

 

10.2 

Configuring with ibaPDA 

 

 

Other documentation  

For the general use of ibaPDA, see the manual "ibaPDA-V6". 

 

After installing ibaPDA and starting the ibaPDA client, select "Configure – I/O Man-
ager…" in the main menu. 

10.2.1 

Configuring ibaPADU-8-M 

1. 

If several iba PCI cards are used in ibaPDA, set the board connected to 
ibaPADU-8-M to the interrupt mode "Master internal" and set the option "In use". 
 

 

 

2. 

Create the device module by one of the following actions: 

  Press the icon "New configuration" 

.  

When the device is connected correctly, the "autodetect" feature will find the iba-
PADU-8-M and place module "Padu 8-M" on the connected FOB link. Alternatively 
right-click the link of the FOB-D or FOB-S card to which the ibaPADU-8-M is con-
nected and select "Autodetect" 
 

 

. 

When the device is connected correctly to this link, the "autodetect" feature will find 
it and place a module "Padu 8-M" on this link. 
 

Summary of Contents for PADU-8-M








































Reviews:

No comments