manualshive.com logo in svg

IBA PADU-8-M, Manual, Page: 26 / 39

Share
Download
IBA PADU-8-M Manual Download Page 26

 

Manual ibaPADU-8-M

 

26 

Issue 1.9 

 

10.1.6 

Control of ibaPADU-8-M in ibaLogic application program 

In order to work with the ibaPADU-8-M, the device must be supplied with some control 
data from the application software. With ibaScope a part of the date is supplied auto-
matically. 

When using the device with ibaLogic the required parameters must be evaluated in the 
application and transferred to the device over the FOB-M output resources. 

For the supply of the parameters iba developed a sample function block FOBM_Control 
which is available from iba on request. 

The use of this function block is described by means of a sample application (layout). 

 

The inputs Run, Apply and F_Reset are set by the application and control the process-
ing, the takeover of new parameters and the resetting. 

The application also evaluates the values for Data_Size, Set_PaduNumber, 
Check_PaduNumber and SampleTime. 

The input Data_Available is directly linked to the input resources (FOBM In Link 0 Data 
Available). 

 

 

Summary of Contents for PADU-8-M








































Reviews:

No comments