manualshive.com logo in svg

IBA PADU-8-M, Manual, Page: 14 / 39

Share
Download
IBA PADU-8-M Manual Download Page 14

 

Manual ibaPADU-8-M

 

14 

Issue 1.9 

 

7.2.6 

Binary LED Indicators L4…L11 

LED 

Status 

Description 

L

n

 : 

(green) 

On 

Off 

Input is true (log „1“) 

Input is false (log „0“) 

n 

= 4..11  (4 corresponds to binary input 00; 11 to binary input 07) 

7.2.7 

Service Interface (X12) 

 

Note 

Firmware may only be updated by iba! 

 

A 9-pin SUB-D port, found on the underside of the device, may be used to load new 
firmware for the device. New firmware is loaded via a V.24 interface. Please contact iba 
regarding loading new firmware.  

 

 

 

Under normal service conditions, the V.24 cable must not be connected. 

 

Service Interface Pinout Diagram 

 

7.2.8 

Shield Connector for Physical Earth (X29) 

Proper connection of cable shielding to the device should be ensured. The shield con-
nector found on the underside of the device should be connected with any total shield 
that serves for all sensor cables.  

 

Note 

Always ground the DIN rail on which the device is installed. 

 

Summary of Contents for PADU-8-M








































Reviews:

No comments