IBA PADU-8-ICP, Manual

Page: 11 / 41

ibaPADU-8-ICP Manual
Issue 1.7 11
7 Device description
7.1 Properties
The ibaPADU-8-ICP has the following properties.

24 V DC unregulated external power supply required (18..32V input voltage possi-
ble).

DIN rail mountable, EMI protected, robust metal housing

3 LED device status indicators (Run/Link/Error)

TX/RX fiber-optic ports for transmission of measured data and reception of configu-
ration requests as well as multiplexing of up to 96 devices

Programmable sampling frequency (period)
 minimum 500 Hz (2 msec)
 maximum 25 kHz (40

s)
 sampling period increment of 50 nanoseconds

8 analog inputs with
 ICP® sensor power
 14-bit ADC
 programmable gain ( 0 dB…60 dB)
 programmable low-pass filter
 galvanic isolation

8 binary inputs with
 galvanic isolation
 8 status outputs via LED

Maximum device communication speed of 200 k samples per second (25 kHz per
channel)

RJ11 socket (iba PCMCIA interface card is not yet supported)

Service interface

Shield terminal for proper grounding of the device to eliminate ground loops