Manual ibaPADU-8-ICP
22 Issue
1.7
10
Configuration
ibaPADU-8-ICP is actually supported ibaLogic-V3, ibaScope and ibaPDA-V6 software.
The following chapters describe example configurations in ibaLogic and ibaPDA. The
settings in ibaScope correspond to the settings in ibaLogic, although the dialogs are
slightly different. For setup of the device with ibaScope please refer to the ibaScope
manual.
10.1
Working with ibaLogic-V3
With ibaLogic you may analyse 25 kHz signals. By using additional (slow) process va-
riable you may define monitoring ranges.
In order to conceive and analyse the behaviour of dynamic processes which are much
faster (40
s) than the usual time base of ibaLogic (1 ms) the data type Array is used
by ibaLogic.
In the following you will find a short description of installation and application of the de-
vice.
10.1.1
Typical Configuration
Figure 4 Configuration with ICP
-Sensor
