Manual ibaPADU-8-ICP
10 Issue
1.7
6
Mounting and dismounting
6.1
Mounting
1.
Place the mounting rail clip attached to the device on the mounting rail.
2.
Press the device down in such a way that the clip of the mounting rail engages with
a click.
3.
Connect the 24 V DC power supply to the termination shown on the device. Ensure
that the polarity is correct prior to applying power.
4.
Connect fiber-optic cable to the TX/RX ports as shown on the device so that the fi-
ber-optic ring is completed
6.2
Dismounting
1.
Disconnect the power supply.
2.
Disconnect all cables.
3.
Close the open fiber optic inputs and outputs with a cover.
4.
Hold the device to prevent it from falling down and press it slightly downwards.
5.
After that pull the device and lift it up. The clip of the mounting rail will disengage
with a click.
6.
Remove the device.
7.
When storing or transporting the device observe the values specified in the techni-
cal data.
