ibaLink-VME
Manual
Issue 1.8
47
Module Layout
No. analog signals
Defining the number of analog signals for this module.
No. digital signals
Defining the number of digital signals for this module.
Further functions
Read configuration from device
Reading the configuration from the device.
Write configuration to device
Writing the configuration to the device.
The changed settings become valid by clicking on <OK> or <Apply>.
ibaLink-VME – Analog tab
Figure 16: ibaLink-VME – Analog tab
Please enter here the analog signals to be recorded sequentially. The columns in the
signal list have got the following meaning:
Name
Assign a meaningful name to each signal and you can enter additionally two com-
ments when clicking on the symbol in the field “Name”.
Unit
Here, you can enter the physical unit of the analog value.
Gain / Offset
Gradient (Gain) and y axis intercept (Offset) of a linear equation. You can convert a
standardized value transferred without a unit into a physical value.
Address
The address specifies the Byte offset of the desired signal within the telegram.
