Manual
ibaLink-VME
46
Issue 1.8
ibaLink-VME – General tab
Figure 15: ibaLink-VME – General tab
Basic settings
Locked
A locked module can only be changed by an authorized user.
Enabled
Here, you can activate data capturing for this module (True).
Name
Here, you can enter a module name.
Module No.
Logical module number for clearly referencing the signals, e.g. in expressions and
ibaAnalyzer. The ibaPDA gives numbers in chronological order, but the number can
be changed by the user.
Timebase
Timebase that is used for the device, given in ms. It is possible to define smaller
timebases than defined in the general acquisition timebase. Cycle times down to
25 µs are possible, depending on the number of signals.
Connection
IP Address
IP address or host name of the device (informative only).
Auto enable/disable
True: ibaPDA starts acquisition, although it cannot connect to the module.
False: ibaPDA won’t start acquisition, when it cannot connect to the module.
