Manual
ibaLink-VME
42
Issue 1.8
9
System Topologies
Multiple system topologies are possible with ibaLink-VME. You find application examples
with the corresponding operation mode settings in chapter 7.2 “Operation modes”.
9.1
ibaPDA Application
Depending on the FO protocol it is necessary to use one, two or three fiber-optic links.
Figure 12 ibaLink-VME with ibaPDA
9.1.1
Configuration in 3Mbit mode
In classic combination of ibaLink-VME and ibaPDA the two fiber-optic output links are
connected to input links on ibaFOB-cards. Each link transmits 64 analog and 64 digital
signals, i.e. a total of 128 signals.
For outputs from ibaPDA to ibaLink-VME, a FO output link and a FO connection to the
RX port of ibaLink-VME is necessary. In ibaPDA I/O manager add a module “FOB alarm”
at the connected link and specify the desired analog and digital output data.
Other documentation
Please refer to the "ibaLink-SM-128V-i-2o" manual.
