Manual
ibaLink-VME
44
Issue 1.8
Advanced Mode
If you enable the option „Advanced Mode“ you can make some additional settings.
Figure 14 ibaLink-VME (P2P) module, advanced mode
Advanced
Swap digital signals
Digital signals can be inverted (true/false)
Read digital signals
You can choose between 8 bit, 16 bit or 32 bit access to digital signals. Depending
on this setting, the bit numbering in the table of the digital signals changes.
No. analog/digital signals
By means of the settings “No. analog signals” and “No. digital signals” you can de-
termine the length of the signal tables. The values should match the setting made
under “FOB – S2 range switch” (equal or smaller than).
Note
If
S2 range switch
setting C or D is selected, the advanced mode is automatically
activated.
