32
Tech Support:
(
877) 591-2491
D)
V Springs. Another method of holding various
parts to a recessed lighting fixture, is the use of “V”
springs. Like the name implies they are shaped in the
form of a V. When compressed (pinching the two legs
of the V) and fitted into the “V Spring Clip” on the side
of the metal lighting fixture they form a spring that
will slide up and down several inches. When attached
to the trim ring (and or reflector) the trim ring can
be pulled away from the ceiling 3” or 4“, allowing you
to reach in, pinch the two “legs of the V” and release
the spring, trim ring and reflector from the recessed
housing.
1)
Once the coil springs (or “V” springs) are
removed from the clip on the lighting fixture, the
trim ring, reflector, and the springs should easily
drop free and can be placed aside.
E)
How to remove coil springs: By gently pulling on
the spring and a slight twist, maneuver the end of the
spring out of the retaining clip. Remove both springs.
Quite often this is easily done with your fingers but is
made easier with a spring removal tool or sometimes
a pair of long nose pliers.
We recommend you store all parts, so that they can
be replaced should you ever wish to remove your
LightSpeaker
®
, for example when taking them with you
during a move.
