14
Tech Support:
(
877) 591-2491
Step 5:
Installing the trim ring.
Your LightSpeaker
®
comes with their own integrated trim
ring. There are two different sizes. Choose your trim ring
based on either A or B below and place the LightSpeaker
®
trim ring over the back of the LightSpeaker
®
. Be sure
the finished side is facing out. Upon completion of the
install, this trim ring should fit snuggly and uniformly to
the ceiling and should also seat properly around the entire
edge of your LightSpeaker
®
.
A)
The thicker trim ring will be used when your
LightSpeaker
®
is installed into a 6“ lighting fixture.
B)
The thinner one when it is installed into a 5” fixture.
As long as the trim ring covers the edges of the lighting
fixture and any rough drywall edges you may use either
trim ring; it will not affect the performance of your
LightSpeaker
®
.
HELPFUL TIP!
Save all the parts so if you move, you can
replace and take your LightSpeakers
®
with you.
