22
Tech Support:
(
877) 591-2491
LightSpeakers™ in Zone 2) the job is nearly finished all
that remains is allowing the transmitter discover where
each of the installed LightSpeakers
®
is located.
1)
To pair your LightSpeakers
®
to your
transmitter, turn off all of the light switches in the
areas where LightSpeakers
®
are located.
2)
Be sure Transmitter is plugged in and the
power button is on.
3)
Push the button marked “PAIRING”. The PAIRING
LED on the transmitter will begin flashing RED.
4)
Turn on all light switches that your LightSpeakers
®
are connected to. The Small LED
light on the speakers will begin
to flash red and will turn green
when the pairing is complete. The
transmitter will automatically find
each speaker and assign it to its
proper zone.
LED Blinks during pairing.
